HotSaNIC-0.5.0-pre6 Setting global

# In this file all global settings for HotSaNIC are defined.
#
# Currently supported operating systems are:
#
# Linux
#   fully featured for any Linux system, based on Kernel 2.4.x
#   2.2.x based systems may encounter some incompatibilities
#
# OpenBSD
# FreeBSD
# NetBSD
#   at the moment a lot of work has to be done to get the system
#   completely running under BSD based systems. Currently supported
#   are the following modules:
#
#        |FreeBSD        |OpenBSD        |NetBSD
#     ----------+---------------+---------------+-----------
#     apcusv    |untested    |untested    |untested
#     apps    |yes        |should work    |yes
#     diskio    |no        |no        |yes
#     dnet    |yes        |should work    |should work
#     networks |no        |no        |no
#     part      |yes        |yes        |yes
#     ping      |yes        |untested    |yes
#     sensors   |yes(1)        |no        |yes(1)
#     shoutcast |should work    |should work    |should work
#     system    |yes        |untested    |yes
#     traffic   |yes        |should work    |yes
#     worms     |should work    |should work    |should work
#
# (1) using the xmbmon utility ver 2.0 or later
#     http://www.nt.phys.kyushu-u.ac.jp/shimizu/download/
#     (can be compiled without X support!!!)
#
#
# solaris
#   same (if not more) amount of work has to be done on Solaris. The
#   current state for this %&%@"$&&%$ OS looks as follows:
#
#     apcusv    yes
#     apps    yes
#     diskio    no
#     dnet    yes
#     networks no
#     part      yes
#     ping      yes
#     sensors   no
#     shoutcast yes
#     system    yes
#     traffic   no
#     worms     yes

#####################################################################
#                                                                   #
# Then let's configure some pathes...                               #
#                                                                   #
#####################################################################

# path to the HotSaNIC main-directory
# this has to be a directory !
#
#   DAEMONDIR="/home/daemon/HotSaNIC"
#
DAEMONDIR="/usr/local/HotSaNIC" 　　　<--- HotSaNIC ホームディレクトリのパス

# path to the "rrdtool" binary
# this has to be a directory !
#
#   BINPATH="/usr/local/rrdtool-1.0.33/bin"
#
BINPATH="/usr/local/rrdtool/bin" 　　　<--- RRDTool のパス

# set LOGDIR to the directory where logfiles shall be created
#   LOGDIR="$DAEMONDIR/var/log/"
#
VARDIR="$DAEMONDIR/var/"

# set LOGDIR to the directory where logfiles shall be created
#   LOGDIR="$DAEMONDIR/var/log/"
#
LOGDIR="$DAEMONDIR/var/log/"

# path to the pid-file for the daemon
#   PIDFILE="$DAEMONDIR/log/rrdtimer.pid"
#
PIDFILE="$DAEMONDIR/var/run/rrdtimer.pid"

# web-directory for all graphs
# this directory must be writeable for the rrdgraph tool
# because each plugin will create its own subdir here.
#
WEBDIR="/var/www/hotsanic" 　　　<--- HotSaNIC のＷｅｂディレクトリ

#####################################################################
#                                                                   #
# Here are some global parameters                                   #
#                                                                   #
#####################################################################

# if DIAGRGAMLOG is set to "all" then all diagrams will be logged.
# anything else will log only the last run of diagram script.
# when logfiles reach LOGSIZE they will get rotated.
# LOGBACKUPS old logfiles will be kept as backups
#
DIAGRAMLOG="last"
LOGSIZE="200000"
LOGBACKUPS="5"

# debug level
#   0=off
#   16777215=full
#   bits 0-9   => main debugging
#   bits 10-17 => module debugging
#   bits 18-23 => SNMP debugging
#
# Human readable levels are also available. Any (comma separated)
# combination of allowed strings and integers will be accepted.
# Prepending a "-" to a definition means to subtract this one.
# Please consult lib/HotSaNIClog.pm for further details on allowed
# human readable level definitions.
#
# examples:
#   DEBUGLEVEL="1023"
#   DEBUGLEVEL="1,4,16"
#   DEBUGLEVEL="MODULE,27"
#   DEBUGLEVEL="MAIN,SNMP"
#   DEBUGLEVEL="FULL"
#   DEBUGLEVEL="FULL,-MAIN_CONFIG"
DEBUGLEVEL="0"

# TIMESTAMPING defines the "verbosity" of log timestamps
#
# 0 -> no timestamps at all
# 1 -> seconds since 1970
# 2 -> Wday year-mon-mday hour:min:sec
TIMESTAMPING="2"

# module-scan timebase (seconds)
# After this time the daemon re-scans for available modules.
#
STIME="120"

# scheduling timings in milliseconds
# this configures the time between the sampling signals given to the
# module daemons
#
SCHEDULE_MIN="100"
SCHEDULE_MAX="200"

# modules listed here (space separated) will be executed
# to use all availabe mods you may enter
# RUN="*"
#
RUN="apps diskio netstat networks ntp part ping sensors system traffic worms"

#####################################################################
#                                                                   #
# These settings affect the diagram generation                      #
#                                                                   #
#####################################################################

# shall the HTML index files be automatically generated on startup?
#
AUTOINDEX="no"

# body tag color and background image information
#
WEB_BACKGROUND="bg.gif"
WEB_MENUBACKGROUND="menubg.gif"
WEB_BGCOLOR="E0E0E0"
WEB_TEXT="000000"
WEB_LINK="000080"
WEB_VLINK="800080"
WEB_ALINK="008000"

# Sizes of all output-graphics in pixels
#
WIDTH="600"
HEIGHT="200"

# the output-format of the generated images may be either "gif" or "png"
#
IMAGEFORMAT="gif"

# modules listed here (space separated) will be shown on webpage
# to use all availabe mods you may enter
# SHOW="*"
#
SHOW="apps diskio netstat networks ntp part ping sensors system traffic worms"

# in which order shall the modules appear on the webpage
# unlisted mods will be added in alphabetical order
#
ORDER="traffic system part ping dnet sensors"

# diagram-rebuild timebase (minutes).
# Usually 15 min. should do fine, but if you think your system
# is too busy, just increase the timebase as you like.
# Values up to about 45 make sense since the lowest-scale graph
# covers 60 minutes of data sampled.
#
DTIME="15"

# diagram-convert timebase (hours)
# After this time the weekly diagrams are being converted to
# the smaller pictures on the main page.
#
CTIME="24"

# This setting controlss how the images will be converted
# to thumbnails
#
#   Value         Behaviour
#
#   "ImgMgck"    Call ImageMagick's "convert" to create thumbnails
#
#   "I::M"       Use the Image::Magick module
#
#   "netpbm"     use netpbm binaries to resize images
#                NOTE: output filter supports .png only!
#                Files will be named ".gif" but contain .png!
#                Uses: giftopnm, pngtopnm, pnmscale, pnmtopng
#
#   "HTML"       Don't convert at all, but use the HTML image resize
#                tag instead. More data has to be transfered using
#                this method, but you won't need additional software.
#
CONVERTMETHOD="ImgMgck"　　　 <--- サムネール作成で使用する変換メソッド

# path to either the "convert" binary from ImageMagick package
# or to the binaries from the "netpbm" package
#
#   CONVERTPATH="/usr/X11R6/bin"
#
CONVERTPATH="/usr/bin"　　　 <--- 変換コマンド convert のパス

# How much shall the thumbnails be scaled compared to the originals.
# Default is 20%.
#
THUMBSIZE="20%"

# refresh time for graphs
# The browser automatically reloads the detailed statistics after
# this timespan.
#
# If you want to disable the auto-refresh, just set the variable to 0
#
REFRESH="300"

#####################################################################
#                                                                   #
# Helper applications                                               #
#                                                                   #
#####################################################################

# configure the pathes of some additional applications which may be
# needed by HotSaNIC
#

# configure the full pathes to snmpwalk and snmpget binaries here.
# These may be needed to get data from remote machines.
#
SNMPWALK="/usr/bin/snmpwalk" 　　　　　<--- snmpwalk のパス
SNMPGET="/usr/bin/snmpget" 　　　　　　<--- snmpget のパス
SNMPBULKWALK="/usr/bin/snmpbulkwalk" 　<--- snmpbulkwalk のパス

settings の設定事例