Cobalt Raq 4 のコンソールログ サンプル

         Cobalt Networks, Inc. - Connecting the Dots
                  Firmware version 2.3.35

Current date: Jul 02 11:27:29 UTC 2006
ROM build info: Mon Oct 9 20:05:49 PDT 2000 war.cobalt.com
System serial number: invalid csum!
Memory found: 128 MB
Initializing I2C bus: done
Scanning PCI bus: done
Initializing IDE: done
  IDE 0 master: found
Initializing SCSI: done
Initializing ethernet: 2 ethernet controllers installed - done
Initializing flash: done
  Flash bank 0: AMD AM29F080B 1MB (1:d5)
  Flash bank 1: not installed.
Initializing USB: done
Mounting rom_fs: done
Initializing i18n - language "en": done

Press spacebar to enter ROM mode
Booting default method - From disk

First stage kernel: Decompressing -- done
Second stage kernel: Decompressing -- done
Linux version 2.2.14C10 (root@adrian1.cobalt.com) (gcc version 2.95.2 19991024 (
release)) #3 Wed Jun 21 15:05:10 JST 2000
Ignoring bogus EBDA pointer 3BFC000
Detected 448210691 Hz processor.
Calibrating delay loop... 894.57 BogoMIPS
Memory: 127980k/131072k available (1076k kernel code, 416k reserved, 1540k data,
 60k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: AMD AMD-K6(tm)-III Processor stepping 04
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.3
Cobalt watchdog v1.3 enabled
Cobalt temperature sensor v1.2 enabled
Serial driver version 4.27 with<4>Keyboard timeout[2]
Keyboard timeout[2]
 no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
lcd: Cobalt LCD Driver v3.01 by
lcd: Andrew Bose <andrew@cobaltnet.com>, Timothy Stonis <tim@cobaltnet.com>
serialnumber: Version 1.1 initialized. Serial number=1a0000079318d601. Copyright
 (c) 1994-2000 Axent Technologies, Inc
Uniform Multi-Platform E-IDE driver Revision: 6.30
ALI15X3: IDE controller on PCI bus 00 dev 78
ALI15X3: 100% native mode on irq 14
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST320413A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ALI15X3: Ultra DMA enabled
hda: ST320413A, 19092MB w/1024kB Cache, CHS=38792/16/63, (U)DMA
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
translucent personality registered
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :   844.296 MB/sec
   p5_mmx    :   818.769 MB/sec
   8regs     :   596.265 MB/sec
   32regs    :   389.001 MB/sec
using fastest function: pII_mmx (844.296 MB/sec)
sym53c8xx: at PCI bus 0, device 14, function 0
sym53c8xx: 53c875 detected
sym53c875-0: rev=0x04, base=0xa0001000, io_port=0x6100, irq=12
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xa0002000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
scsi : detected total.
eth0: Invalid EEPROM checksum 0x2506, check settings before activating this devi
ce!
eth0: Intel EtherExpress Pro 10/100 at 0x6200, 00:10:E0:03:26:11, IRQ 11.
  Board assembly 000000-000, Physical connectors present:
  Primary interface chip None PHY #0.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0xdbd8681d).
  Receiver lock-up workaround activated.
eth1: Invalid EEPROM checksum 0x9a08, check settings before activating this devi
ce!
eth1: Intel EtherExpress Pro 10/100 at 0x6240, 00:10:E0:03:28:86, IRQ 10.
  Board assembly 000000-000, Physical connectors present:
  Primary interface chip None PHY #0.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0xdbd8681d).
  Receiver lock-up workaround activated.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 hda3 hda4
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
INIT: version 2.74 booting
Activating swap partitions Adding Swap: 131536k swap-space (priority -1)

Setting hostname localhost
Checking root filesystem
/dev/hda1 was not cleanly unmounted, check forced.
/dev/hda1: 28977/192512 files (0.6% non-contiguous), 475649/768095 blocks
ok
mount: proc already mounted
Remounting root filesystem in read-write mode
Finding module dependencies
Checking filesystems
/dev/hda3 was not cleanly unmounted, check forced.
/dev/hda3: 142/51376 files (6.3% non-contiguous), 12076/205128 blocks
/dev/hda4 was not cleanly unmounted, check forced.
/dev/hda4: 151/4612096 files (2.0% non-contiguous), 745047/18446400 blocks
ok
Mounting local filesystems
Setting clock  (utc): Sun Jul  2 20:31:27 JST 2006 Sun Jul  2 20:31:27 JST 2006

Enabling swap space
INIT: Entering runlevel: 3
Starting network Disabling IPv4 packet forwarding.
Cobalt Networks Bandwidth Limiting Module
Copyright (c) 1999, Cobalt Networks, Inc.
All rights reserved
ifconfig  lo  127.0.0.1 netmask 255.0.0.0 broadcast 127.255.255.255